China x19crmonbvn11 1 Manufacturers Factory Suppliers
-
X19CrMoNbVN11-1 Turbine Blade Steel
Smelting method: Non VIM+ESR
Read More
Executive standards: GJB
Delivery status: forged, solid solution
Surface condition: vehicle light -
Incoloy 825 Pipe
Products Description Incoloy 825 pipe is a high-performance nickel-iron-chromium alloy pipe. With its excellent corrosion resistance and comprehensive mechanical properties, it plays an important...
Read More -
hastelloy c22 tubing
HASTELLOY C22 is exceptionally resistant to a variety of chemical environments, including strongly oxidizing substances such as ferric chloride, cupric chloride, chlorine, thermally contaminated...
Read More -
254 smo stainless steel
Equivalent Grade: 254SMO/1.4529/EN X1CrNiMoCuN20-18-7/uns S31254
Read More
Surface: Bright
Status: Hot-Rolled 、Hard-Drawn 、Solutioned
Tags: 1.4529, 254smo, UNS S31254 -
1.4313 Material
Equivalent Grade: DIN 1.4313 / EN X3CrNiMo13-4 / S41500 / SUSF6NM
Read More
Surface: Bright
Status: Hot-Rolled 、Hard-Drawn 、Solutioned
Tags: 1-4313, X3CrNiMo13-4, UNS S41500, F6NM -
AISI 616 Stainless Steel Bar
Smelting method:VIM+ESR
Read More
Executive standards: GJB
Delivery status: forged, solid solution
Surface condition: vehicle light -
Inconel 718 Nickel Alloy Tube
Products Description UNS N07718 is also known as Inconel 718,UNS N07718, W.N.2.4668, NiCr19Fe19Nb5,GH4169 (China) UNS N07718 is a Ni-Cr-Fe base precipitation-hardening deformed superalloy with a...
Read More -
Inconel 625 Nickel Alloy Pipe
Inconel 625 (ASTM B444 UNS N06625) Nickel-Chromimum-Molybdenum-Columbium Alloys (Nickel 58%)
Read More
Incoloy 825 (ASTM B424 N08825) Nickel-Iron-Chromium-Molybdenum-Copper Alloy (Nickel 38 to... -
Alloy300 Stainless Steel Pipe
Products Description Alloy 330 / 1.4886 is a heat resistant nickel-iron-chromium alloy.Good oxidation and scale resistance. Good mechanical properties with high strength at elevated temperatures....
Read More -
1.4886 Alloy Steel Pipe
Products Description W. Nr. 1.4886 is an austenitic alloy with good high-temperature strength and corrosion resistance. It has a solid solution composition and is not hardenable by heat treatment....
Read More -
Haynes 25 Cobalt Alloy Wire Rod
Products Description Haynes 25 Cobalt alloy wire rods Cobalt based high-temperature alloys are a type of high-temperature alloy that mainly consists of cobalt, containing a considerable amount of...
Read More -
Alloy L605 Cobalt-based Alloy Bar
Products Description L605 is a 20Cr and 15W solid solution strengthened cobalt base superalloy. It has medium durability and creep strength below 815℃, excellent oxidation resistance below 1090℃,...
Read More
WEBSee the chemical composition and physical properties of EN 10269 Grade X19CrMoNbVN11-1 soft annealed (+A), find alternative materials, and connect with...
WEBSuperalloy in the X19CrMoNbVN11-1 Special Alloy grade. Tube Pipe in the X19CrMoNbVN11-1 Special Alloy grade. Non-Magnetic Steel in the X19CrMoNbVN11-1...
WEB0.015 %. Show Material materials with Sulfur of 0.015 %. Vanadium. 0.1 - 0.3 %. Show Material materials with Vanadium of 0.1 - 0.3 %. See the chemical composition and physical properties of EN...
WEBX19CrMoNbVN 11-1. 该牌号是制造螺栓、螺钉、螺柱和螺母的高温材料之一,建议紧固件最高使用温度600°C。. 淬火后具有较高的强度,并有磁性。. C1组钢的耐腐蚀性能有限,用于涡轮、泵和刀. ⓐ 未经买方同意,不得随意向钢中添加表中未列的元素,冶炼精加工除外 ......
WEBEn 10269 X19CrMoNbVN11-1 Specification is a European Standard that specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low...
WEBX19CrMoNbVN11-1 (1.4913) , Z20CDNbV11 (France, AFNOR NFA ) - European (EU, EN) and wordwide Steel equivalent grades These comparison table is only intended as an indication of the closest khown...
















