1050 Polished Mild Steel Plate
1050 Mild steel is a medium carbon high-strength carbon structural steel. As a common steel, it is widely used in the industrial field, especially the plate, which is not only a typical cold work die steel material, but also often used as processing raw materials for machinery plants to produce various Machine element. Characteristics: This steel has moderate machinability, low cold deformation plasticity, poor weldability, no temper brittleness during heat treatment, but low hardenability. The critical diameter in water is 13-30mm, and there is a tendency for cracking during water quenching. This steel is usually used after heat treatment such as normalizing, quenching and tempering, or high-frequency surface quenching.
|
Equivalent Grade
|
|||
|
GB
|
AISI
|
DIN
|
JIS
|
|
50#
|
1050
|
1.1213/CF53
|
S50C
|
|
Chemical Composition
|
|||
|
Grade
|
C
|
Mn
|
Si
|
|
S50C
|
0.47~0.55
|
0.60~0.90
|
0.15~0.35
|
|
Delivery Condition
|
||||
|
Specification/Steel grade
|
S50C
|
S48C
|
S45C
|
BM48C
|
|
Thinkness(mm)
|
18~500
|
18~500
|
60~500
|
60~500
|
|
Width(mm)
|
250~1600
|
250~1600
|
250~1600
|
250~1600
|
|
Hardness
|
≥HB150
|
≥HB150
|
≥HB150
|
≥HB150
|
Product Picture

Characteristics:
1050 mild steel plate is used to manufacture Machine element with small dynamic load, impact load and good wear resistance requirements, such as forged gears, shaft friction discs, machine tool spindles, engine spindles, rolls, pull rods, spring washers, etc. Characteristics and application: When not heat treated: HB ≤ 241; Heat treatment: normalizing; Impact energy: Aku ≥ 31J; High strength, poor plasticity and toughness, moderate cutting ability, poor weldability, and a tendency to form cracks during water quenching. Normally normalized and used in a quenched and tempered state, used for parts that require high strength, wear resistance or elasticity, and have low dynamic and impact loads, such as gears, rollers, machine tool spindles, connecting rods, secondary springs, etc
Our factory

Steel Making

Ingot Production

Forged Bars
Machinary
Delivery

Packing & Delivery
-
The inner size of container is below:
-- 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high)
-- 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high)
-- 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high
Hot Tags: 1050 polished mild steel plate, China 1050 polished mild steel plate manufacturers, suppliers, factory
Previous
S355jr Carbon Steel PlateYou Might Also Like
Send Inquiry













