8620h Steel

8620h Steel

Equivalent Grade: 20NCD2/1.6523/21NiCrMo2
Steel-making Condition: EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:Annealed , Quenched + Tempered
Surface Condition:Black, Grinded, Peeled, Rough turned, Polished
Send Inquiry
Product Introduction
Products Description 

SAE8620H steel equivalent to 20CrNiMoH in China.It is a surface hardening steel belonging to the Cr-Ni-Mo alloy. Its performance standard is ASTM A29/A29M-04. 8620H steel bar is widely used in carburizing and carbon-nitriding processes. After carburizing, the surface of SAE8620H exhibits high hardness, wear resistance, and contact fatigue strength. Its heart still retains good ductility, making it capable of withstanding high impact loads. ASTM8620H is mainly used as a material for shock-resistant and wear-resistant parts such as car bearings ect.

 

8620H Chemical Compositions %

Standard Steel Grade (UNS) C Si Mn P, ≤ S, ≤ Cr Ni Mo Cu, ≤ O, ≤ Al, ≤
ASTM A322;
ASTM A29/A29M
8620 (UNS G86200) 0.18-0.23 0.15-0.35 0.70-0.90 0.035 0.040 0.40-0.60 0.40-0.70 0.15-0.25 - - -
ASTM A534 8620H 0.17-0.23 0.15-0.35 0.60-0.95 0.025 0.015 0.35-0.65 0.35-0.75 0.15-0.25 0.3 0.002 0.05


Equivalent Grades 

Brand Name Ravne No. Mat. No. DIN EN AISI
20NCD2 769 1.6523 21NiCrMo2 20NiCrMo2 8620

 

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
SAE 8620H steel Density [g/cm3]: 7.86

 

Soft Annealing
Heat to 650-700oC, cool slowly. This will produce a maximum Brinell hardness of 212.

 

Heat Treatment

Treatment Temperature Cooling
Case hardening 880-980oC Oil (water), hot bath 160-250oC
Carburising 880-980oC Oil (water), hot bath 160-250oC
Direct hardening 880-980oC Oil, hot bath 160-250oC
Core refining 860-900oC Oil, hot bath 160-250oC
Core refining 780-820oC Oil, hot bath 160-250oC
Tempering 150-200oC Air
SAE8620H Material Mechanical properties  
 
  • Tensile strength σ B (MPa): ≥ 980 (100)
  • Yield strength σ S (MPa): ≥ 785 (80)
  • Elongation δ 5 (%): ≥ 9
  • Reduction of area ψ (%): ≥ 40
  • Impact energy Akv (J): ≥ 47
  • Impact toughness value α KV (J/cm2): ≥ 59 (6)
  • Hardness: ≤ 197HB
34crnimo6 QT

8620H steel Charactaristics and Applications

 

34crnimo6 material properties

8620H steel round bar has high surface hardness, wear resistance, and contact fatigue strength. At the same time, it still maintains good toughness and can withstand high impact loads.

8620H hardenable alloy steel is mainly used as materials such as automotive bearings, such as automotive bearings and wear-resistant parts.

 

 

Production Description

SAE8620 Steel Round Bar

 
FY2J485250CLB7GGWSSH
 
Factory Introduction
 

Huitai Special Metals has been committed to the research, development and production of special tool steel, die steel and alloy steel since 1997. Especially for High-strength alloy steel, Roll and Gear steel.

Owns 25/60 tons of VOD, VHD refining furnace,12 ton vacuum consumable furnace, 12 ton vacuum induction furnace , 2000 ton/3500 ton quick forging machine,1000 ton precision forging machine,5 tons / 8 tons of electro-hydraulic A set of hammer units, two sets of 1/0.75/0.25 tons air hammer, two sets of 630-ton three-way hydraulic press units, two sets of 315-ton four-column hydraulic leveling units.

product-1046-246

product-600-600

Steel Making

product-600-600

Ingot Production

17NiCrMo6-4 Steel Round Bar 1.6569

Forged Bars

17NiCrMo6-4+QT Steel Shaft

Machinary

Packing & Delivery

8620h

Din 1.6523 Steel sae 8620H Steel Bars Packing & Delivery

 Port:Any Chinese Port
  • The inner size of container is below:

    -- 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high)

    -- 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high)
    -- 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high)

Hot Tags: 8620h Steel, China 8620h Steel manufacturers, suppliers, factory, st52 seamless pipes, 8620 steel flat bar, steel alloy pipe, alloy 20 sheet, 4140 steel pipe, welding alloy 20 pipe

Send Inquiry

whatsapp

Phone

E-mail

Inquiry