1.4876 Stainless Steel Bar
1.4876 Stainless Steel Bar

1.4876 Stainless Steel Bar

Products Description Incoloy series: 800, 800H, 800HT, 825, 925 Wire : 0.01-10mm Strip : 0.05*5.0-5.0*250mm Bar : φ4-50mm;Length 2000-5000mm Pipe : φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet : δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm 1.4876 Steel Equivalent Grades 1.4876 Steel Chemical...

Send Inquiry

Product Introduction

Products Description

Incoloy series: 800, 800H, 800HT, 825, 925
Wire: 0.01-10mm
Strip: 0.05*5.0-5.0*250mm
Bar: φ4-50mm;Length 2000-5000mm
Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm
Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm

1.4876 Steel Equivalent Grades

Steel Grade	Incoloy 800	Incoloy 800H/800HT	Incoloy 825	Incoloy 925	Incoloy 926
Corresponding Brand	N08800/1.4876/ OCr20Ni32AITi / NS111	N08810 / 1.4958 / NS112	N08825 / 2.4858 / 0Cr21Ni42Mo3Cui2/ TNS142	N09925	N08926 / 1.4529 / Mo6CuN

1.4876 Steel Chemical Compositions

C⩽	0.100	0.05-0.1	0.050	0.030	0.020
Mn⩽	1.50	1.50	1.00	1.00	2.00
P⩽	0.030	0.030		0.030	0.030
S⩽	0.015	0.015	0.030	0.030	0.010
Si⩽	1.00	1.00	0.50	0.50	0.50
Cr⩽	19.0-23.0	19.0-23.0	19.5-23.5	19.5-22.5	19.0-21.0
Ni⩽	30.0-35.0	30.0-35.0	38.0-46.0	42.0-46.0	24.0-26.0
Mo			2.5-3.5	2.5-3.5	6.0-7.0
Cu	≤0.75	≤0.75	1.50-3.0	1.50-3.0	0.50-1.0
N					0.15-0.25
Nb				0.50
other	AI:0.15-0.60 Tr:0.15-0.60	AI:0.15-0.60 Tr:0.15-0.60	AI:≤0.20 Tr:0.60-1.20	Tr:1.9-2.4 AI:0.1-0.5

Mechanical properties of 1.4876 / 1.4958(At room and elevated temperatures)

At RT
Yield: 170N/mm²
Tensile: 450-700N/mm²
Creep rupture strength of 100.000h value (included VdTÜV safty value 1,5)

		800h					800ht/hp
According to		VdTÜV 412	VdTÜV 412	VdTüv 434	VdTüv 434	ASME UNS N08810	ASME UNS N08810	ASME UNS N08811	ASME UNS N08811
(Al+ti)%		<=0,7 or 1,0	<=0,7 or 1,0	<=0,7	<=0,7	<=1,0	<=1,0	<=1,2	<=1,2
t°C	T°F	N/mm²	ksi	N/mm²	ksi	N/mm²	ksi	N/mm²	ksi
593	1100		11,5		11,5	80	11.5	89	13
600	1112	76	11	76	11	76		84
648	1200		7		7,5		7.5		8.5
650	1202	49	7	51	7.5	50		56
700	1292	31	4.5	35	5	33		38
704	1300		4.5		5	32	5	37	5.5
750	1382	20	3	24	3.5	22		24
760	1400		2.5		3		3		3.5
800	1472	13	1.8	16	2.2	15		17
815	1500		1.5		2	13	1.9	15.2	2.2
850	1562	7	1	10	1.6	10		11.7
871	1600		0.7		1.3	8	1.2	10	1.5
898	1650		0.4		1	7	1	7.5	1.1
900	1652	2,7	0.4	7	1	7		7.5
926	1700				0.8	5	0.7
950	1742			5	0.7	4.5
953	1750				0,6	4.5	0.6
981	1800				0,5	3.5	0.5

Product Picture

309s stainless steel bars

Our factory

Steel Making

Ingot Production

Forged Bars

Machinary

Production Process

product-1-1

1.4876 Stainless Steel Bar Characteristics

Good creep resistance at temperatures above 600 ° C.
To avoid a weakening in strength between 500 and 700 ° C the content of Al + Ti is limited to max.0.7%
Good resistance to oxidizing, reducing and nitriding atmospheres and at varying oxidizing and carburizing conditions
Metallurgical stability in long-term use at high temperatures

Caution: If temperature 500-700 ° C is passed often during the process, 800h should be preferred. 1.4876 steel may show detrimental phases.

Quality Control

We make sure that our every product is made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers.

JIS 1.4828 Chinese Manufacture Stainless Steel Brother Ba