1.4543 Stainless Steel Bar
1.4543 Stainless Steel Bar
1.4543 Stainless Steel Bar
1.4543 Stainless Steel Bar

1.4543 stainless steel

Equivalent Grade: 1.4543 / X3CrNiCuTiNb12-9 / S45500 / XM-16
Surface: Bright
Status: Hot-Rolled 、Hard-Drawn 、Solutioned
Tags: 1-4543, X3CrNiCuTiNb12-9, XM-16, Z3Cnut12-9, S94-090, S45500

Send Inquiry

Product Introduction

Products Description

1.4543 stainless steel is a structurally hardened martensitic stainless steel,combines a hardness of about 48 HRC . 1.4543 Stainless Steel Bar has good corrosion resistance. 1.4543 stainless steel has a hardening peak at 480°C which allows easy ageing after machining on an initially solution treated condition. The grade is remelted to improve the cleanliness and homogeneity of the material.

1.4543 Equivalent Grade

Material No.	EN Designation	UNS	Alloy
1.4543	X3CrNiCuTiNb12-9	S45500	455

Chemical Compositions

C %	Si≤ %	Mn≤ %	P≤ %	S≤ %	Cr %	Mo %	Ni %	Ti≤ %	Cu %	Nb %
≤ 0.03	0.50	0.50	0.02	0.015	11.0-12.5	≤ 0.50	3.00-5.00	0.90-1.40	1.50-2.50	0.10-0.50

Mechanical Properties

Hardness HB 30≤ HB	0.2% Yield strength R_p≥ N/mm²	Tensile strength R_mN/mm²	Elongation A₅≥ %	Modulus of elasticity kN/mm²
480	1510	1585-1720	8	200

Product Photos

1.4543 Stainless Steel Bar

High quality 1.4539 stainless steel rod production process

Firstly, the raw material requirements for preparing 1.4539 stainless steel rods are very strict. Must use high quality steel ingots for processing. During the processing, should also pay attention to temperature control and atmosphere protection to ensure the quality of raw materials. Secondly, forging and heat treatment are key steps in the preparation process. Forging can make the internal structure of steel bars more dense, improving their strength and toughness; Heat treatment can adjust the microstructure of the steel rod and further improve the mechanical properties of 1.4539 stainless steel bar.

The preparation of 1.4539 stainless steel rods also requires attention to the hygiene and safety of the production environment. The production site must be kept clean and tidy, ensuring a dust-free and impurity free environment to avoid affecting product quality. During the production operation process, must strictly follow the regulations to avoid safety accidents caused by operational errors. These measures can ensure the preparation quality and production efficiency of 1.4539 stainless steel bars.

Our factory

Steel Making

Ingot Production

Forged Bars

Machinary

Production Process

1.4543 Stainless Steel Round Bar

Specification of Custom 1.4543 Stainless Steel Round Bars

Grade: 1.4543 stainless steel bar

Square bar size : 4 to 100mm

Hollow Bar : 32mm OD x 16mm ID to 250mm OD x 200mm ID)

Hex Bar size : 2-100mm A/F

Rectangles Size : 33 x 30mm to 295 x 1066mm

Flat bar size : Thickness: 2 -100mm, Width: 10 to 500mm

Round bar size : Diameter: 3-~800mm

Surface: Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline

Tolerance : H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements

Technique : Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod

Condition : Hardened & tempered, annealed

Quality Control

We make sure that our produced 1.4543 stainless steel Bars are made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers.

JIS 1.4828 Chinese Manufacture Stainless Steel Brother Ba

Packing & Delivery

1.4543 stainless steel

Hot Tags: 1.4543 stainless steel, China 1.4543 stainless steel manufacturers, suppliers, factory, 28mm steel tube, stainless steel divider bar, 3mm stainless steel bar, 410 stainless steel round bar, stainless rectangular tube, stainless steel square hollow bar

Custom 455 Stainless Steel

1.4034 material equivalent