Nov 10, 2022 Leave a message

Properties of alloy steel plate

With the development of science, technology and industry, higher requirements have been put forward for materials, such as higher strength, resistance to high temperature, high pressure, low temperature, corrosion, wear and other special physical and chemical properties. Carbon steel can no longer fully meet the requirements.


The performance of carbon steel mainly has the following deficiencies:

(1) In general, the maximum quenching diameter of water quenched carbon steel is only 10mm-20mm.


(2) Low strength and yield ratio, such as that of ordinary carbon steel Q235 σ S is 235MPa, while low alloy structural steel 16Mn σ S is more than 360MPa. 40 steel σ s/ σ B is only 0.43, much lower than alloy steel.


(3) Poor tempering stability Due to poor tempering stability, carbon steel needs to use lower tempering temperature to ensure higher strength during quenching and tempering, so the toughness of steel is low; In order to ensure good toughness, the strength is low when high tempering temperature is used, so the comprehensive mechanical property level of carbon steel is not high.


(4) Carbon steel that cannot meet the requirements of special properties is often poor in oxidation resistance, corrosion resistance, heat resistance, low temperature resistance, wear resistance and special electromagnetic properties, and cannot meet the requirements of special use properties.


Send Inquiry

whatsapp

Phone

E-mail

Inquiry