W. 1.2343 cold working die steel is mainly used for processes such as punching, stretching, bending, cold extrusion, cold heading, wire rolling, and bending of metal or non-metallic materials. Therefore, it is required that the W.1.2343 mold has high strength, high wear resistance, and sufficient toughness to ensure its service life. W. 1.2343 type steel, as a universal cold working mold, is widely used in mass production, and its heat treatment methods usually have two types: primary hardening method (low quenching+low recovery) and secondary hardening method (high quenching+high recovery).
W. The quenching temperature of 1.2343 one-time hardening method is 1020~1040 degrees, and the tempering temperature can be selected according to the requirements of the mold. Generally, cold stamping molds with high hardness and wear resistance are required, and low-temperature tempering is used at 160~180 degrees. After tempering, the hardness can reach HRC60 or above. For stamping molds that require high hardness and a certain degree of toughness, tempering at 250-270 degrees can be used, and the hardness after tempering can reach HRC58-60. For molds that withstand high impact toughness, high-temperature tempering at 520 degrees can be used, and the hardness after tempering is HRC55-57.
W. 1.2343 The quenching temperature of secondary hardness method is 1080~1120 degrees. Because there is a large amount of residual austenite in the steel after quenching, the hardness is low (HRC42~45). Through multiple (3~5 times) high-temperature tempering, the residual austenite is transformed into martensite to produce secondary hardening. The hardness can range from HRC59 to 64, and W.1.2343 is mainly suitable for mold parts that require red hardness. The disadvantage is poor impact toughness, which affects the multi punch life, so it is not suitable for cold working molds.
Due to the use of low-temperature tempering in W.1.2343 one-time hardening method, although the hardness can reach HRC60 or above, the tempering temperature is relatively low, and the stress relief after quenching is not sufficient. Moreover, in subsequent processing, it is easy to reduce the surface hardness of the workpiece due to grinding heat, which affects its service life.
So Youde adopts a medium temperature quenching+high temperature tempering method, which is about 1050 degrees Celsius quenching, and the hardness after quenching is at HRC63. Then use high-temperature tempering at temperatures ranging from 500 to 520. Due to the fact that the hardness after secondary hardening and tempering can reach HRC60 or higher, the quenching temperature using this process is lower than that of secondary hardening method. After heat treatment, the mold strength is higher and it also has a certain degree of toughness. Moreover, due to the sufficient stress relief after high-temperature tempering, it is not easy to crack during subsequent wire cutting discharge machining, annealing is not easy during grinding, and the surface can be coated with titanium, which has been applied in production to a certain extent.
Apr 13, 2023
Leave a message
1.2343 Mold Steel Heat Treatment Process
Send Inquiry




