4130 Chromoly Seamless Pipe
Products Description
AISI 4130 chromoly seamless alloy steel pipe tube for bicycle
4130 pipe is a type of chromoly alloy seamless steel pipe. Alloy pipes are divided into structural seamless pipes and high-pressure heat-resistant alloy pipes. Mainly different from the production standards and industry of alloy pipes, annealing and tempering of alloy pipes change its mechanical properties. To achieve the required processing conditions. Its performance is higher than that of general seamless steel pipes. It has higher variability utilization value, alloy pipe contains more Cr in chemical composition, and has high temperature resistance, low temperature resistance and corrosion resistance.
| Chemical Composition(%) | Mechanical Property | |||||||||
| C | Si | Mn | S | P | Cr | Ni | Cu | Mo | Yield Strength | Tensile Strength |
| ( σs ) | ( σb ) | |||||||||
| 0.28~0.33 | 0.15~0.30 | 0.40~0.60 | ≤0.04 | ≤0.035 | ≤0.15 | 0.80~1.10 | / | 0.15~0.25 | ≥785(80) (MPa) |
≥930(95) |
| (MPa) | ||||||||||
| End Shape | Beveled end, plain end, vanished, or adding plastic caps to protect the two ends as per customer's requirements | |||||||||
| Surface | Oiled, Galvanized, Phosphate etc | |||||||||
| Treatment | ||||||||||
| Technique | Cold drawn | |||||||||
| Application | 1. Automotive and mechanical pipes | |||||||||
| 2. Petroleum cracking pipes | ||||||||||
| 3. High Pressure Boiler Pipe | ||||||||||
| 4. Low and middle pressure fluid transportation pipeline | ||||||||||
| 5. Chemical fertilizer equipment pipes | ||||||||||
| 6. Heat exchanger pipes | ||||||||||
| Delivery | 1. BK (+C) | No heat treatment after last cold forming process. | ||||||||
| Conditions | 2. BKW (+LC) | After last heat treatment there is a light finishing pass (cold drawing) | ||||||||
| 3. BKS (+SR) | After the final cold forming process the tubes are stress relieve annealed. | |||||||||
| 4. GBK (+A) | After the final cold forming process the tubes are annealed in a controlled atmosphere. | |||||||||
| 5. NBK (+N) | After the final cold forming process the tubes are annealed above the upper transformation point in acontrolled atmosphere. | |||||||||
| Package | 1. Bundle Packing. | |||||||||
| 2. Plain end or vanished as per customer's request. | ||||||||||
| 3. Wrapped in waterproof paper. | ||||||||||
| 4. Sackcloth with several steel strips. | ||||||||||
|
5. Pack in heavy tri-wall boxes |
||||||||||
Product Picture
Our factory
Steel Making
Ingot Production
Forged Bars
Machinary
Packing & Delivery
Packing & Delivery
-
The inner size of container is below:
-- 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high)
-- 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high)
-- 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high)
Hot Tags: 4130 Chromoly Seamless Pipe, China 4130 Chromoly Seamless Pipe manufacturers, suppliers, factory, 4140 Steel Hollow Bar, alloy steel sheet, 4340 steel tube, AISI 4130 Chromoly Steel Pipe, steel mechanical tubing, AISI 4130 Seamless Steel Pipe
Previous
AISI 4130 Steel TubeYou Might Also Like
Send Inquiry