1.2436 Cold Work Mold Steel

Introduction:

We are a renowned manufacturer in China, dedicated to providing high-quality steel products to merchants from countries outside of China. Our DIN 1.2436 Cold Work Mold Steel Round Bar is one of the most sought-after products in the industry. Designed using state-of-the-art technology and top-grade materials, our steel round bar brings unparalleled performance, durability, and strength to your business.

Features:

Our DIN 1.2436 Cold Work Mold Steel Round Bar is designed to offer outstanding mechanical and physical properties. Key features include:

1. High wear resistance: Our steel round bar is formulated with high wear resistance materials that ensure it lasts longer than most conventional steel bars.

2. Excellent toughness: Our steel bar has excellent toughness, meaning it can withstand repeated impact and deformations.

3. Good machinability: Our steel round bar is designed to be easy to machine. You can reduce downtime and costs by using our material due to its high machinability.

4. Uniform hardness: Our steel bar has uniform hardness throughout its structure, thus reducing the risk of cracking.

5. Corrosion resistance: We use corrosion-resistant materials in our steel production, making it ideal for use in harsh environments.

Benefits:

By using our DIN 1.2436 Cold Work Mold Steel Round Bar in your business, you can enjoy numerous benefits. Key advantages include:

1. Increased tool life: Our steel round bar can improve the performance and life of your tools by up to 30%. With this, you can reduce downtime due to tool changes.

2. Enhanced productivity: Our steel bar’s high machinability means you can reduce machining time, thus increasing productivity.

3. Reduced maintenance costs: Our steel bar is designed to last longer, meaning you can reduce maintenance and replacement costs.

4. High durability: Our steel bar’s excellent toughness and wear resistance ensure it can withstand frequent use and repeated impact.

5. High-performance applications: Our steel bar is ideal for use in high-performance applications, such as cutting and stamping dies, forming tools, and plastic moulds.

Applications:

Our DIN 1.2436 Cold Work Mold Steel Round Bar is ideal for use in various applications. Key areas where our product can be applied include:

1. Moulds and Dies: Our steel bar is ideal for use in cutting and stamping dies, forming tools, and plastic moulds.

2. Industrial blades: Our steel bar can be used in the production of industrial blades, such as paper cutters, slitters, and shear blades.

3. Machine parts: Our steel round bar can also be applied in the manufacture of machine parts, such as screws, gears, and assembling parts.

4. Automotive and aerospace parts: Our steel bar can also be used in the manufacture of automotive and aerospace parts, such as shafts and gears.

Quality Assurance:

We are committed to bringing reliable and high-quality steel products to our customers. Our DIN 1.2436 Cold Work Mold Steel Round Bar undergoes thorough quality checks and tests before it is delivered to our customers. We guarantee that our customers receive products that meet international quality standards.

Conclusion:

In summary, our DIN 1.2436 Cold Work Mold Steel Round Bar is a top-of-the-range steel product that brings superior performance and durability to your business. By using our product, you can expect increased tool life, enhanced productivity, and reduced maintenance costs. Whether you operate in the automotive, aerospace, or industrial sector, our steel bar is ideal for use in various applications. Please contact us to learn more about our products and services.

Products Description

DIN 1.2436 Cold Work Mold Steel is a high-carbon, 12% chromium alloy cold work tool steel with tungsten. 1.2436 steel is an air hardening alloy tool steel with excellent resistance to wear and abrasion. As a high carbon high chromium tool steel 1.2436 steel has better through hardening properties than D3 steel and dimensional stability combined with high resistance to tempering.

1.2436 Cold Work Mold Steel Features:

1.2436 steel has the characteristics of high hardenability, strength and toughness, wear resistance (3 to 4 times higher than general low alloy tool steel) and small quenching volume deformation.

1.2436 Steel Applications

1.2436 steel is widely used to make cold work dies with large cross-section, complex shape, strong impact force and high wear resistance, such as silicon steel die, thread rolling die, wire drawing die, etc.

Products parameters

Equivalent grades:

GB	W.Nr/DIN	AISI	JIS
Cr12W	1.2436	D6	SKD2

 

Chemical composition (%)

GRADE	C	Si	Mn	Cr	P	S	W	V
1.2436	2.00-2.30	0.10-0.40	0.30-0.60	11.0-13.0	0-0.03	0-0.03	0.6-0.8	0.1-0.25
D6	2.00-2.25	0.10-0.40	0.20-0.40	11.0-12.0	0-0.03	0-0.03	0.6-0.8	0.1-0.25

Recommend heat treatment:

Size of AISI D6 (Can be Customised)
Round Bar	Diameter(mm):	Hot Forged: φ50-500	Length(mm):2500-5000
		Hot Rolled:≤50mm
Steel Plate	Thickness(mm):	Hot Forged:≥20mm	Width(mm):20-810 mm
		Hot Rolled:≤20mm

 

Product Picture

Our factory

Steel Making

Ingot Production

Forged Bars

Machinary

 

Heat Treatment of 1.2346 steel 

Forging
    Heat slowly to 700°C and then more rapidly to 900-1050°C.  After forging cool slowly, preferably in a furnace.
Annealing
    As this grade is supplied in the annealed and machineable condition re-annealing will only be necessary if it has been forged or hardened. Anneal the steel at 800-840°C  and slow furnace cool. Hardness after annealing will be approximately 225HB.
Stress Relieving
    When machining operations have been heavy or if the tool has an unbalanced section, remove stresses before hardening by heating up to 650-700°C, equalise, cool slowly.
Hardening
    Pre heat slowly to 750-800°C and soak thoroughly. Continue heating up to the final hardening temperature of 950-980°C, allow the component to be heated through. Cool in air or quench in oil. X210CrW12 is suitable for vacuum (high speed gas) hardening.
Tempering
    Heat the steel uniformly and thoroughly at the selected tempering temperature and hold for at least one hour per 25mm of total thickness. Double tempering of X210CrW12 should be carried out with intermediate cooling to room temperature.

Temperature [°C]	100	200	300	400	500	600
Hardness [HRc]	63	62	60	58	56	48

The application case

 

Applications

1.2346/AISI D6 tool steel are suitable for Blanking tools, stamping tools, embossing tools, scraping tools, trimming tools, woodworking tools, drawing tools, press tools, stone moulds, sintered tools, machine knives, hammer cores, ring rollers, thread rolling dies, plastic moulds.

 

Payment terms:

• T/T 30% deposit and the 70% balance after finished production.

• Delivery condition:

• For abundant stock, 7-10 days.

• For customized products, 30-40 days

Why Choose Us?
1) Competitive price andquality from our own factory.
2) Approved by ISO9001,CE,SGS every year.
3) Best service with 24 hours reply.
4) Flexible payment with T/T,L/C,Trade Assurance.
5) Smooth production ability(1000tons/month).
6) Quick delivery and standard exporting package.

 

Why choose us?

• As a manufacturer of Die Steel Bar, we are committed to delivering high-quality products that meet or exceed our customers' expectations.
• We have been chosen as the only supplier of long-term cooperation by many enterprises at home and abroad.
• Our Die Steel Bar products are manufactured to the highest standards of quality and precision.
• The company meets the needs of customers with unique system strategies and professional service products, and is committed to satisfying all of our customers.
• At our factory, we take great pride in producing high-quality Die Steel Bar products that meet the needs of our customers.
• With excellent products, reasonable prices, timely supply, and thoughtful service, we have won wide recognition in the industry and the trust of customers, and continue to maintain the company's long-term and stable development.
• We are committed to delivering high-quality Die Steel Bar products that meet the needs of our customers and exceed their expectations.
• We further stimulate the passion and vitality of our team, keep innovating and surpassing, to make the industry bigger, stronger and better, and achieve new leaps.
• We are proud to be a leader in the Die Steel Bar manufacturing industry and are dedicated to delivering the best products and services to our customers.
• Our DIN 1.2436 Cold Work Mold Steel Round Bar has absorbed cream and quintessence from international manufactures and then entered the market just like ten thousands rivers flowing to the sea.

Hot Tags: 1.2436 Cold Work Mold Steel, China 1.2436 Cold Work Mold Steel manufacturers, suppliers, factory, H13 Die Steel Bar, Die Steel Bar, Die Steel, 1 2379 Tool Steel Round Bar, 1 2436 Cold Work Tool Steel Round Bar, 1 2746 Tool Steel Round Bar